News

Don't forget to clean the screen for daily maintenance of copper wire granulator machine

Writer: admin Time:2021-10-21 11:29 Browse:

The copper wire granulator machine is an environmentally friendly mechanical equipment used to smash waste wires, circuit wires, miscellaneous wires, communication wires, data wires, and earphone wires and sort the copper and plastic in them. It is also a waste recycling equipment. Under normal circumstances, we can use it to decompose the waste wires and miscellaneous wires that we don't use to realize the effective recycling of resources. If any equipment wants to be used for a long time, regular cleaning and maintenance are indispensable. So, what parts of the copper wire granulator machine need to be cleaned? When using the copper wire granulator machine, there are two parts that are easier to block, and these two parts are also We need to clean up frequently.

Power Cable Granulating Facility Copper Wire Recycling Machine

Power Cable Granulating Facility Copper Wire Recycling Machine

1. Feeding port: Feeding is the main prerequisite for copper rice machining operations. Without the feeder, it is impossible to complete various operations such as crushing and processing of waste wires and cables. Because of this, the feed port will also be blocked when it is used. If the material carried in the feed port is too large, serious congestion will occur, resulting in a decrease in the feed rate. Therefore, daily cleaning of the feed inlet is the basic condition to ensure the normal and efficient operation of the machine and equipment.

2. Screen: The screen is the main guarantee for filtering particles, making the processing of copper and plastics more pure and high-quality. It is precisely because of this that the screen will become extremely clogged after long-term use and work. Therefore, when using the copper wire granulator machine, we must clean them regularly to clean up the blockage of the screen, which is conducive to the processing effect of copper rice.

3. When the sorting of the copper wire granulator machine is not clean, in one case, the diameter of the waste wires is small, and the copper wire granulator machine can process various circuit lines, miscellaneous wires, communication lines, data lines, and the diameter between 5-20mm. Used wires such as earphone cords. If the diameter of the processed waste wires is too small, the copper-plastic separation rate of the copper wire granulator machine equipment will be affected, and the separation will not be clean. Secondly, the production and debugging of the copper wire granulator machine is not in place. The installation and debugging of the equipment before the production of the copper wire granulator machine is very important, including the load test of the copper wire granulator machine, and the determination is made on the basis of a good dry running test.

In summary, if you want to ensure the long-term and effective work of the copper wire granulator machine, and ensure high-quality and high-efficiency operation, you may wish to pay more attention to the two components that are prone to clogging, the inlet and the screen, and clean them daily. It must be targeted at them.

CONTACT US

Tel: 0086-13674945231(whatsapp)

Email: sunymachine@gmail.com

Add: Henan Communication Industrial Park) 5th St., Economic-Technological Development Zone, Zhengzhou