Wet wipes production process

Time：0000-00-00 00:00:00

Wet wipes are divided into ordinary wet wipes and sanitary wipes. The difference between ordinary wet wipes, sanitary wipes and disinfection wipes will focus on the production process, production process requirements, production process parameters and production process of single-piece wet wipes. picture.

Popular Baby Wet Wipes Making Machine Best Selling Wet Wipe

1 Process, requirements and parameters of single-piece wet wipes

(1) Spunlace non-woven fabric: According to the quality of different spunlace non-woven fabrics, adjust the tape tension to ensure that the tape tension meets the needs of the normal operation of the equipment.

(2) Longitudinal folding: According to the requirements of "Quality Inspection Requirements for Single-Pack Wet Wipes", the material tape is folded, and the folded size is 60±3.

(3) Applying liquid medicine: apply the liquid medicine according to the requirements of the "Quality Inspection Requirements for Single-Piece Wet Wipes", and the liquid medicine should be applied evenly, with a liquid content of 3.5 times, and an allowable deviation of ±1g.

(4) Horizontal slitting: The cut edges of the wet wipes after slitting should be neat, free of burrs, and no knife rust. The size after slitting is 180, and the allowable deviation is ±6%.

(5) Horizontal folding: neatly folded and centered, the folded size is 90±5.

(6) Unwinding and feeding of the small film: According to the quality of different small films, adjust the tension of the small film to ensure that the tension of the small film meets the needs of the normal operation of the equipment.

(7) Small package molding: The width of the folded small package film in the center of the plate is 70, and the allowable deviation is ±3.