The working principle and precautions of copper granulator machine

Time：2022-04-07 15:13:57

After the waste wires and cables are broken, they become plastic fragments and copper meters. The plastic crushing pieces and the copper rice are separated from the core under the dual action of airflow push and suction and the linear excitation of the screen box, and the waste wire recycling equipment makes it move forward on the screen wave, and the copper rice, plastic and plastic mixture --- The same discharge port is sent out, and the dust is sent to the dust collector through the air duct for collection.

The vibration screen is controlled by frequency conversion, the equipment can adjust the vibration frequency according to different working conditions, and the air volume is adjusted by the regulating valve. Sequence starts, sequence stops. It is very easy to operate and realize automatic operation.

1. After the copper granulator machine is turned on, the machine should be idling for a few minutes. Make sure there is no abnormality before starting to work.

2. In the process of use, how much is the waste wire recycling equipment, the feeding should be uniform and average, and observe whether there are impurities doped to avoid damage to the equipment.

3. The copper granulator machine needs to be checked regularly to see if the fixed screws are loose, whether the waste wire recycling equipment manufacturer needs to add or replace the lubricating oil, whether the bearing box is well sealed, and whether the hammer head is worn or not.

4. During the production process, if any problem is found, the machine should be shut down for inspection first, and the waste wire recycling equipment should be recovered before continuing to work after confirming that there is no problem with the equipment.