News

Technical principle of waste wire and cable recycling equipment

Time:2022-04-16 14:48:25

Waste wires and cables are relatively common in our daily life, and are also one of the key recycled materials in the recycling industry. Waste wire and cable recycling equipment Dry cable wire reycling machine production line recycling and crushing complete set of equipment can automatically separate the recycled waste cables and wires through cutting, peeling, crushing, screening and other processes to automatically separate pure copper with a content of 99.9%, and the production line equipment is fully automatic control .

First, the purpose

All over the world, there are many kinds of waste wires and communication cables that have been used or exchanged. Our purpose is to overcome the loss of copper and other by-products during recycling, and make them more scientific and automated. It reduces personnel and increases recycling rates, which in turn increase productivity. It not only develops the economy and protects the environment, but also benefits the development of the regeneration industry.

Second, the effect

1> Economic effect: Regenerate the same wire, this machine has a recovery rate of more than 99%, which enables us to effectively use more wires in limited resources, and the price is low, which greatly reduces the economic burden of users.

2> Environmental protection effect: The whole process of crushing → sorting → dust collection is rigorous and harmonious, which is more effective than burning or using other methods.

3. Single machine use

1> Pulverizer - pulverize the wire into 1-3mm;

2> Sorting machine - divide the crushed material into copper or other foreign objects;

3> Dust collector—collects and discharges the dust generated in the process of crushing and sorting.

4. Machine Features

1> The entire production line has a high degree of automation and is easy to operate. (manual or automatic);

2> 99% recovery rate in the sorting process;

3>Dry pulverizer can produce copper with a purity of 99%;

4>The life of the machine is half, just replace the consumable accessories;

5> The price is lower and the performance is better than other machines (even the thin wires can be separated);

cable wire 

recycling machine

5. Working principle:

Principle: Under the action of wind, two kinds of substances with different densities are deflected by the amplitude movement on the screen surface with a certain angle, so that the copper wire with high density is attached to the screen and faces the copper outlet, and the plastic skin with low density It floats on the copper wire and flows to the skin outlet. So as to achieve the purpose of copper-plastic separation. The clean rate of separation is proportional to the diameter of a single copper wire. The larger the diameter of the single copper wire is, the cleaner the separation of the plastic is, while the smaller the diameter of the single copper wire is, the worse the separation effect of the plastic is.

The features of this device are:

1> The degree of automation is high, and the operation method is easy. (manual or automatic);

2>The recovery rate is as high as 99%

3>Dry pulverizer can produce copper with a purity of 99%;

4> The machine is used for a long time (half), just replace the consumable accessories;

5>The mechanical cost is high, and the processing scale is large (the thin wires can also be separated)

Through the above introduction, I believe you have a certain understanding of waste wire and cable recycling equipment. If you want to know more, you can always contact us for consultation. We will provide you with detailed information and model quotation.

CONTACT US

Tel: 0086-13674945231(whatsapp)

Email: sunymachine@gmail.com

Add: Henan Communication Industrial Park) 5th St., Economic-Technological Development Zone, Zhengzhou