Mini copper powder electrolysis plant

Time：2022-11-04 16:45:28

Electrolytic copper, also known as anion copper, uses copper sulfate and sulfuric acid electrolyte as electrolyte, pyrolytic refined copper as anode, pure copper sheet or stainless steel plate as cathode, and electrolyzed by direct current in the electrolytic cell. Under the action of DC voltage during electrolysis, the anion copper is chemically dissolved and dissolved into the electrolyte, and the copper ions in the electrolyte tend to be negative, and deposit on the negative electrode as electrolytic copper. During the electrolysis process, gold and silver whose potential is more positive than that of electrolytic copper are not dissolved but settle in the anode mud.

Features of small electrolytic copper equipment:

1. The electrolyzed copper material can be directly put into the anode frame for electrolysis without smelting.

2. No unpleasant and toxic gas is produced during the electrolysis process, and the air on site is fresh.

3. The electrolytic liquid uses water-soluble acid liquid, the acid concentration is very low, there is no direct harm to the human body, and the operation is safe.

4. The cost of electrolysis of one ton of high-purity copper plates is only a few hundred yuan, which can achieve low energy consumption and high output value.

5. The whole set of Pukeyuan electrolytic copper equipment is widely used, and can be used for waste copper-containing liquid, crushed copper powder, copper alloy particles, and scrap copper for gold plating. silver. Nickel and other waste products, truly realize a multi-purpose machine.

6 The purity of gold, silver, palladium and platinum of the anode slime after electrolysis is extremely high.